P0E92 — Drive motor B inverter: voltage sensor B reading implausible
| Meaning | The control unit found that the value from voltage sensor B on the inverter for motor B doesn't agree with other data, such as traction battery voltage. A signal is present but isn't believable. Which motor is 'B' is set by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Limited power
Slow or uneven throttle response
Fault message
Reduced charging or regenerative braking
Common causes
Resistance in the connector or wiring
Internal inverter problem
Irregular high-voltage circuit voltage
Another sensor fault upsetting the comparison
What to do
How to read code P0E92
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E92 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E92 mean?
Drive motor B inverter: voltage sensor B reading implausible. The control unit found that the value from voltage sensor B on the inverter for motor B doesn't agree with other data, such as traction battery voltage. A signal is present but isn't believable. Which motor is 'B' is set by the manufacturer.
Can I keep driving with code P0E92 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E92
Out-of-calibration or faulty voltage sensor Resistance in the connector or wiring Internal inverter problem Irregular high-voltage circuit voltage Another sensor fault upsetting the comparison
How do you fix code P0E92?
A scan tool check that compares the measured voltages is needed. Have it done by a workshop qualified for high voltage. If power is reduced, drive gently and don't push the car.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E91 — Drive motor B inverter: voltage sensor B circuit f...
- Next code: P0E93 — Drive motor B inverter: voltage sensor B signal to...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high