P0E93 — Drive motor B inverter: voltage sensor B signal too low
| Meaning | The control unit read a signal that is too low from voltage sensor B on the inverter for motor B. It often comes from a poor contact, a wire shorted to ground, or the sensor itself. The meaning of 'B' is the manufacturer's. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Fault message on the dashboard
Second motor's drive missing
Limp mode
Common causes
Wire shorted to ground
Faulty voltage sensor
Internal inverter fault
Moisture in the assembly
What to do
How to read code P0E93
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0E93 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0E93 mean?
Drive motor B inverter: voltage sensor B signal too low. The control unit read a signal that is too low from voltage sensor B on the inverter for motor B. It often comes from a poor contact, a wire shorted to ground, or the sensor itself. The meaning of 'B' is the manufacturer's.
Can I keep driving with code P0E93 active?
With caution: limp mode possible, have it checked soon
Common causes — P0E93
Corroded or loose connector Wire shorted to ground Faulty voltage sensor Internal inverter fault Moisture in the assembly
How do you fix code P0E93?
Don't touch the orange cables: they carry high voltage. Take the car to a qualified workshop, which will check connectors and wiring first. Avoid long trips if power drops.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0E92 — Drive motor B inverter: voltage sensor B reading i...
- Next code: P0E94 — Drive motor B inverter: voltage sensor B signal to...
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high