P0EE8 — Charge port temperature sensor B: signal out of range
| Meaning | The control unit has detected that the signal from charge port temperature sensor B is outside the expected range or does not change as it should compared with real conditions. The sensor responds, but the value is not believable. Which point of the port is sensor B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging stopping for no apparent reason
Warning light on
Charging error message
Port temperature reading that seems not to match reality
Common causes
Unstable electrical contact in the connector
Moisture or oxidation in the port
Charge port that is genuinely overheating
Problem in the charging control unit
What to do
How to read code P0EE8
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0EE8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0EE8 mean?
Charge port temperature sensor B: signal out of range. The control unit has detected that the signal from charge port temperature sensor B is outside the expected range or does not change as it should compared with real conditions. The sensor responds, but the value is not believable. Which point of the port is sensor B depends on the manufacturer.
Can I keep driving with code P0EE8 active?
With caution: limp mode possible, have it checked soon
Common causes — P0EE8
Temperature sensor drifting or aged Unstable electrical contact in the connector Moisture or oxidation in the port Charge port that is genuinely overheating Problem in the charging control unit
How do you fix code P0EE8?
Have the value read by sensor B checked with the car cold, comparing it with the other temperature sensors, and check the condition of the port. If the port really does get too hot, avoid charging until it is sorted.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0EE7 — Charge port temperature sensor B: circuit fault
- Next code: P0EE9 — Charge port temperature sensor B: signal low
Related codes
- P0E00 — Generator phase U current sensor circuit fault
- P0E01 — Generator phase U current sensor out of range
- P0E02 — Generator phase U current sensor: signal too low
- P0E03 — Generator phase U current sensor: signal too high
- P0E04 — Generator phase V current sensor circuit fault
- P0E05 — Generator phase V current sensor: signal out of range
- P0E06 — Generator phase V current sensor: signal too low
- P0E07 — Generator phase V current sensor: signal too high
- P0E08 — Generator phase W current sensor circuit fault
- P0E09 — Generator phase W current sensor: signal out of range
- P0E0A — Generator phase W current sensor: signal too low
- P0E0B — Generator phase W current sensor: signal too high