Skip to content
Fault code dictionary (DTC)

P0EF8 — Battery charger A input voltage sensor B reading not plausible

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningSensor B, which measures the input voltage to charger A, gives a value that does not match what is expected or what other sensors show. The voltage may be real but misread, or the sensor may be out of calibration. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Slow charging or limited charging power
Charging stopping for no apparent reason
Charging error message
Odd mains voltage shown on the scan tool

Common causes

Voltage sensor out of calibration or faulty
High-resistance connections from corrosion
Unstable mains supply or unsuitable extension lead
Partly damaged wiring
Internal charger fault

What to do

First rule out the external supply: try another outlet or charging station and avoid extension leads. If the code returns, have the charger checked with a scan tool.

How to read code P0EF8

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EF8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EF8 mean?

Battery charger A input voltage sensor B reading not plausible. Sensor B, which measures the input voltage to charger A, gives a value that does not match what is expected or what other sensors show. The voltage may be real but misread, or the sensor may be out of calibration. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer.

Can I keep driving with code P0EF8 active?

With caution: limp mode possible, have it checked soon

Common causes — P0EF8

Voltage sensor out of calibration or faulty High-resistance connections from corrosion Unstable mains supply or unsuitable extension lead Partly damaged wiring Internal charger fault

How do you fix code P0EF8?

First rule out the external supply: try another outlet or charging station and avoid extension leads. If the code returns, have the charger checked with a scan tool.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes