Skip to content
Fault code dictionary (DTC)

P0EF9 — Battery charger A input voltage sensor B signal low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a signal on the circuit of sensor B, which measures the input voltage to charger A, that is lower than allowed. It can come from a wire shorted to ground, a faulty sensor or a missing supply to the circuit. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Charging not starting
Charging stopping after a few moments
Charging error message
Input voltage read as zero or too low on the scan tool

Common causes

Sensor wire shorted to ground
Faulty voltage sensor
Unplugged or corroded connector
Missing supply to the sensor circuit
Internal charger fault

What to do

Inspect the charger connectors and wiring for moisture or chafing. Also try another outlet to rule out the external supply. If charging does not work, plan a check without waiting too long.

How to read code P0EF9

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0EF9 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0EF9 mean?

Battery charger A input voltage sensor B signal low. The control unit detected a signal on the circuit of sensor B, which measures the input voltage to charger A, that is lower than allowed. It can come from a wire shorted to ground, a faulty sensor or a missing supply to the circuit. The letters A and B identify a specific charger and sensor, and their exact meaning depends on the manufacturer.

Can I keep driving with code P0EF9 active?

With caution: limp mode possible, have it checked soon

Common causes — P0EF9

Sensor wire shorted to ground Faulty voltage sensor Unplugged or corroded connector Missing supply to the sensor circuit Internal charger fault

How do you fix code P0EF9?

Inspect the charger connectors and wiring for moisture or chafing. Also try another outlet to rule out the external supply. If charging does not work, plan a check without waiting too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes