Skip to content
Fault code dictionary (DTC)

P24A7 — EGR cooler coolant pump: control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module drives a dedicated pump that circulates coolant through the EGR cooler. It found the pump control circuit open, meaning interrupted, so the pump does not receive the command. Without circulation the cooler can overheat.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
EGR disabled by the control module, with higher emissions
Possible localized overheating of the EGR cooler
Loss of power in some conditions
Coolant temperature rising more than usual
Slightly altered consumption

Common causes

Pump connector corroded or disconnected
Broken or damaged wire to the pump
Electric pump with a broken winding
Faulty supply fuse or relay
Faulty control module or driver, which is rare

What to do

First check the pump connector, wiring, fuse and relay, since these are the simplest causes to verify. Avoid prolonged heavy loads until it is fixed, to avoid overheating the cooler. The coolant level should be checked with the engine cold.

How to read code P24A7

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P24A7 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (4) points to auxiliary emission controls, and the last two (A7) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P24A7 mean?

EGR cooler coolant pump: control circuit open. The control module drives a dedicated pump that circulates coolant through the EGR cooler. It found the pump control circuit open, meaning interrupted, so the pump does not receive the command. Without circulation the cooler can overheat.

Can I keep driving with code P24A7 active?

With caution: limp mode possible, have it checked soon

Common causes — P24A7

Pump connector corroded or disconnected Broken or damaged wire to the pump Electric pump with a broken winding Faulty supply fuse or relay Faulty control module or driver, which is rare

How do you fix code P24A7?

First check the pump connector, wiring, fuse and relay, since these are the simplest causes to verify. Avoid prolonged heavy loads until it is fixed, to avoid overheating the cooler. The coolant level should be checked with the engine cold.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes