Skip to content
Fault code dictionary (DTC)

B1314 — Battery saver relay coil circuit open (B1314)

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module detected that the battery saver relay coil circuit is open, so it cannot command the relay. The code is manufacturer-defined and the detail varies between makes.
FamilyBody (B)

Typical symptoms

Interior loads not being cut off and draining the battery
Accessories not working at all
No click from the relay
Body warning light
Electrical functions missing in certain conditions

Common causes

Relay coil broken
Broken command wire or unplugged connector
Blown fuse
Relay socket with corroded contacts
Body control module not driving the relay (rare)

What to do

Check the fuse, socket and connectors of the relay and see whether it clicks. Keep an eye on the battery: if it goes flat while parked, have it checked soon. Otherwise it is not a fault that stops the car.

How to read code B1314

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1314 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1314 mean?

Battery saver relay coil circuit open (B1314). The module detected that the battery saver relay coil circuit is open, so it cannot command the relay. The code is manufacturer-defined and the detail varies between makes.

Can I keep driving with code B1314 active?

With caution: limp mode possible, have it checked soon

Common causes — B1314

Relay coil broken Broken command wire or unplugged connector Blown fuse Relay socket with corroded contacts Body control module not driving the relay (rare)

How do you fix code B1314?

Check the fuse, socket and connectors of the relay and see whether it clicks. Keep an eye on the battery: if it goes flat while parked, have it checked soon. Otherwise it is not a fault that stops the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes