Skip to content
Fault code dictionary (DTC)

B1315 — Battery saver relay coil shorted to battery voltage (B1315)

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module detected an abnormal voltage on the battery saver relay command circuit, as if the wire were touching battery positive. The code is manufacturer-defined and the detail varies between makes.
FamilyBody (B)

Typical symptoms

Battery going flat while parked
Relay always energised
Accessories that do not switch off
Blowing fuse
Body warning light

Common causes

Command wire with damaged insulation touching a live wire
Relay with shorted coil or contacts
Connector with moisture
Wiring modified for added accessories
Faulty body control module (rare)

What to do

If the battery goes flat while parked, have it checked soon, because that is the most concrete symptom. Meanwhile inspect the wiring and connectors near the relay and do not replace the fuse with a larger one.

How to read code B1315

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1315 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1315 mean?

Battery saver relay coil shorted to battery voltage (B1315). The module detected an abnormal voltage on the battery saver relay command circuit, as if the wire were touching battery positive. The code is manufacturer-defined and the detail varies between makes.

Can I keep driving with code B1315 active?

With caution: limp mode possible, have it checked soon

Common causes — B1315

Command wire with damaged insulation touching a live wire Relay with shorted coil or contacts Connector with moisture Wiring modified for added accessories Faulty body control module (rare)

How do you fix code B1315?

If the battery goes flat while parked, have it checked soon, because that is the most concrete symptom. Meanwhile inspect the wiring and connectors near the relay and do not replace the fuse with a larger one.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes