Skip to content
Fault code dictionary (DTC)

B1399 — Driver window one-touch relay circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected a break in the circuit of the relay that controls the automatic function of the driver's window: the electrical signal does not arrive or does not return. B1399 is manufacturer-defined; the exact point of the break depends on the brand and model.
FamilyBody (B)

Typical symptoms

Automatic function of the driver window missing
Window stuck or moving only manually
No relay click when the button is pressed
Problem that comes and goes when the door is moved
Other door controls sometimes not responding

Common causes

Broken wire in the harness between door and pillar
Connector not fully seated or with corroded terminals
Relay with an open coil
Ground disconnected or corroded
Switch pack with a broken internal track
Door module with a damaged output

What to do

Start by inspecting the harness where it passes through the door and the connectors, since a wire broken by repeated door movement is the most common cause. Then the circuit continuity is checked. It is not urgent for driving safety, but fix it before the window gets stuck open.

How to read code B1399

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1399 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1399 mean?

Driver window one-touch relay circuit open. The control module detected a break in the circuit of the relay that controls the automatic function of the driver's window: the electrical signal does not arrive or does not return. B1399 is manufacturer-defined; the exact point of the break depends on the brand and model.

Can I keep driving with code B1399 active?

With caution: limp mode possible, have it checked soon

Common causes — B1399

Broken wire in the harness between door and pillar Connector not fully seated or with corroded terminals Relay with an open coil Ground disconnected or corroded Switch pack with a broken internal track Door module with a damaged output

How do you fix code B1399?

Start by inspecting the harness where it passes through the door and the connectors, since a wire broken by repeated door movement is the most common cause. Then the circuit continuity is checked. It is not urgent for driving safety, but fix it before the window gets stuck open.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes