Skip to content
Fault code dictionary (DTC)

B1398 — Driver window one-touch relay circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module found a general fault in the circuit of the relay that handles one-touch automatic up and down movement of the driver's window. B1398 is manufacturer-defined and I cannot be certain of its internal logic on every brand: it points to a problem in this circuit, but does not by itself say whether the relay, the wiring or the switch is at fault.
FamilyBody (B)

Typical symptoms

Driver window no longer goes fully up or down with one touch
Window moves only while the button is held
Window does not move at all
Relay can be heard clicking but the window does not respond
Intermittent operation, worse in cold or damp weather

Common causes

Driver window relay worn or with dirty contacts
Connector or ground with corrosion
Door wiring damaged by repeated opening and closing
Door switch pack with worn contacts
Door module with an internal fault
Fuse or circuit supply not in order

What to do

First check the fuse and supply to the circuit, then the connectors and the wiring through the door hinge area. It does not affect driving, but a window that will not close leaves the car open to rain and theft, so do not leave it too long.

How to read code B1398

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code B1398 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code B1398 mean?

Driver window one-touch relay circuit fault. The control module found a general fault in the circuit of the relay that handles one-touch automatic up and down movement of the driver's window. B1398 is manufacturer-defined and I cannot be certain of its internal logic on every brand: it points to a problem in this circuit, but does not by itself say whether the relay, the wiring or the switch is at fault.

Can I keep driving with code B1398 active?

With caution: limp mode possible, have it checked soon

Common causes — B1398

Driver window relay worn or with dirty contacts Connector or ground with corrosion Door wiring damaged by repeated opening and closing Door switch pack with worn contacts Door module with an internal fault Fuse or circuit supply not in order

How do you fix code B1398?

First check the fuse and supply to the circuit, then the connectors and the wiring through the door hinge area. It does not affect driving, but a window that will not close leaves the car open to rain and theft, so do not leave it too long.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes