B1564 — Door ajar circuit open
| Meaning | The control module sees no continuity in the door switch circuit: a wire or contact is broken, and the door may always show one state. B1564 is manufacturer-defined and I don't have reliable details on the module or door involved for every make, so I follow the reference title. |
| Family | Body (B) |
Typical symptoms
Interior light not coming on when opening the door
Courtesy lights out on one door
Alarm not detecting the door opening
Intermittent problem when moving the door
Common causes
Loose or corroded connector
Broken door switch
Terminal pushed out of the connector
Faulty body control module
What to do
How to read code B1564
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1564 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1564 mean?
Door ajar circuit open. The control module sees no continuity in the door switch circuit: a wire or contact is broken, and the door may always show one state. B1564 is manufacturer-defined and I don't have reliable details on the module or door involved for every make, so I follow the reference title.
Can I keep driving with code B1564 active?
With caution: limp mode possible, have it checked soon
Common causes — B1564
Broken wire in the door-to-pillar boot Loose or corroded connector Broken door switch Terminal pushed out of the connector Faulty body control module
How do you fix code B1564?
Check the connector and wiring in the door boot, which flexes with every opening. Clean and recheck the switch. It doesn't stop the car, but it can make the alarm and lights unreliable.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1563 — Door ajar circuit failure
- Next code: B1565 — Door ajar circuit shorted to battery voltage
Related codes
- B1500 — Left turn signal lamp circuit open
- B1501 — Left turn signal lamp circuit short to battery
- B1502 — Left turn signal lamp circuit short to ground
- B1503 — Right turn signal lamp circuit failure
- B1504 — Right turn signal lamp circuit open
- B1505 — Right turn signal lamp circuit short to battery
- B1506 — Right turn signal lamp circuit short to ground
- B1507 — Flash-to-pass switch circuit failure
- B1508 — Flash-to-pass switch circuit open
- B1509 — Flash-to-pass switch circuit short to battery
- B1510 — Flash-to-pass switch circuit short to ground
- B1511 — Driver door handle circuit failure