B2102 — Antenna circuit short to ground
| Meaning | The control unit detected that an antenna circuit is touching ground. This code is manufacturer-defined and I am not certain which antenna it refers to on your brand: it could be the radio or an access system. The exact meaning needs to be verified. |
| Family | Body (B) |
Typical symptoms
Unreliable remote or keyless entry
Possible dashboard message
No obvious symptoms
Common causes
Faulty antenna or amplifier
Damaged or damp connector
Faulty module connected to the antenna
What to do
How to read code B2102
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2102 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2102 mean?
Antenna circuit short to ground. The control unit detected that an antenna circuit is touching ground. This code is manufacturer-defined and I am not certain which antenna it refers to on your brand: it could be the radio or an access system. The exact meaning needs to be verified.
Can I keep driving with code B2102 active?
With caution: limp mode possible, have it checked soon
Common causes — B2102
Antenna cable pinched or touching the body Faulty antenna or amplifier Damaged or damp connector Faulty module connected to the antenna
How do you fix code B2102?
Check the antenna, the cable and the connectors, especially after work on the roof, tailgate or audio system. It is not a driving emergency, but have the affected antenna checked if something does not work.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2101 — Head restraint switch circuit fault
- Next code: B2103 — Antenna not connected or antenna signal missing
Related codes
- B2100 — Driver door key cylinder switch fault
- B2101 — Head restraint switch circuit fault
- B2103 — Antenna not connected or antenna signal missing
- B2104 — Passenger door key cylinder switch fault
- B2105 — Throttle position input too low (definition to be confirmed)
- B2106 — Throttle position input too high (definition to be confirmed...
- B2107 — Front wiper motor relay circuit shorted to battery positive
- B2108 — Trunk key cylinder switch fault
- B2109 — Heated windshield relay circuit shorted to battery positive
- B2110 — Front wiper motor relay circuit open
- B2111 — Door lock input shorted to ground
- B2112 — Driver side memory set switch stuck