B2108 — Trunk key cylinder switch fault
| Meaning | The control unit has found a problem in the switch that signals when the key is turned in the trunk lock. B2108 is manufacturer-defined and the exact meaning can vary by make, but the reference points to this switch. |
| Family | Body (B) |
Typical symptoms
The trunk will not open from the remote or from inside
The alarm does not arm, or gives false alarms
Trunk light always on or always off
No symptom, only the stored code
Common causes
Wiring damaged in the passage to the trunk lid
Water or corrosion in the lock
Faulty lock mechanism
Faulty comfort control unit
What to do
How to read code B2108
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2108 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2108 mean?
Trunk key cylinder switch fault. The control unit has found a problem in the switch that signals when the key is turned in the trunk lock. B2108 is manufacturer-defined and the exact meaning can vary by make, but the reference points to this switch.
Can I keep driving with code B2108 active?
With caution: limp mode possible, have it checked soon
Common causes — B2108
Worn or dirty switch in the cylinder Wiring damaged in the passage to the trunk lid Water or corrosion in the lock Faulty lock mechanism Faulty comfort control unit
How do you fix code B2108?
Check whether the trunk opens and closes normally with all the controls. Look at the wiring where it passes to the lid and at the condition of the lock. It is not urgent, but it can cause alarm problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2107 — Front wiper motor relay circuit shorted to battery...
- Next code: B2109 — Heated windshield relay circuit shorted to battery...
Related codes
- B2100 — Driver door key cylinder switch fault
- B2101 — Head restraint switch circuit fault
- B2102 — Antenna circuit short to ground
- B2103 — Antenna not connected or antenna signal missing
- B2104 — Passenger door key cylinder switch fault
- B2105 — Throttle position input too low (definition to be confirmed)
- B2106 — Throttle position input too high (definition to be confirmed...
- B2107 — Front wiper motor relay circuit shorted to battery positive
- B2109 — Heated windshield relay circuit shorted to battery positive
- B2110 — Front wiper motor relay circuit open
- B2111 — Door lock input shorted to ground
- B2112 — Driver side memory set switch stuck