B2111 — Door lock input shorted to ground
| Meaning | The control unit has found that the input signal for the door lock controls is at ground, as if a button were pressed all the time. B2111 is manufacturer-defined and I can't say for certain which switch or line is involved on your make. |
| Family | Body (B) |
Typical symptoms
Doors locking or unlocking at random
Door panel controls not working
Alarm not arming
No symptom, only the stored code
Common causes
Pinched wire or damaged insulation touching ground
Water inside a switch or connector
Door wiring damaged in the flexible passage
Faulty comfort control unit
What to do
How to read code B2111
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2111 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2111 mean?
Door lock input shorted to ground. The control unit has found that the input signal for the door lock controls is at ground, as if a button were pressed all the time. B2111 is manufacturer-defined and I can't say for certain which switch or line is involved on your make.
Can I keep driving with code B2111 active?
With caution: limp mode possible, have it checked soon
Common causes — B2111
Lock button stuck or dirty Pinched wire or damaged insulation touching ground Water inside a switch or connector Door wiring damaged in the flexible passage Faulty comfort control unit
How do you fix code B2111?
Try all the locking controls and note whether one behaves oddly. Check the wiring in the passages between doors and pillars. If the doors unlock by themselves, have it checked soon, as it affects the vehicle's security.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2110 — Front wiper motor relay circuit open
- Next code: B2112 — Driver side memory set switch stuck
Related codes
- B2100 — Driver door key cylinder switch fault
- B2101 — Head restraint switch circuit fault
- B2102 — Antenna circuit short to ground
- B2103 — Antenna not connected or antenna signal missing
- B2104 — Passenger door key cylinder switch fault
- B2105 — Throttle position input too low (definition to be confirmed)
- B2106 — Throttle position input too high (definition to be confirmed...
- B2107 — Front wiper motor relay circuit shorted to battery positive
- B2108 — Trunk key cylinder switch fault
- B2109 — Heated windshield relay circuit shorted to battery positive
- B2110 — Front wiper motor relay circuit open
- B2112 — Driver side memory set switch stuck