B2106 — Throttle position input too high (definition to be confirmed)
| Meaning | The reference describes a throttle position signal out of range, too high. B2106 is manufacturer-defined and that definition does not look consistent with the body family: I have no reliable information on what it means on your make, so I won't guess. If it really relates to the throttle, the control unit is seeing a sensor voltage higher than expected. |
| Family | Body (B) |
Typical symptoms
Idle too high or uneven
Abnormal response to the accelerator
Engine going into reduced-power mode
No symptom, only the stored code
Common causes
Corroded or damaged connector
Faulty position sensor or pedal
Throttle body problem
Faulty control unit
What to do
How to read code B2106
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2106 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2106 mean?
Throttle position input too high (definition to be confirmed). The reference describes a throttle position signal out of range, too high. B2106 is manufacturer-defined and that definition does not look consistent with the body family: I have no reliable information on what it means on your make, so I won't guess. If it really relates to the throttle, the control unit is seeing a sensor voltage higher than expected.
Can I keep driving with code B2106 active?
With caution: limp mode possible, have it checked soon
Common causes — B2106
Sensor wiring touching a power supply Corroded or damaged connector Faulty position sensor or pedal Throttle body problem Faulty control unit
How do you fix code B2106?
Have the code read with a tool that covers your make, to find out which module it belongs to. If the accelerator response feels abnormal, don't keep driving it hard and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2105 — Throttle position input too low (definition to be...
- Next code: B2107 — Front wiper motor relay circuit shorted to battery...
Related codes
- B2100 — Driver door key cylinder switch fault
- B2101 — Head restraint switch circuit fault
- B2102 — Antenna circuit short to ground
- B2103 — Antenna not connected or antenna signal missing
- B2104 — Passenger door key cylinder switch fault
- B2105 — Throttle position input too low (definition to be confirmed)
- B2107 — Front wiper motor relay circuit shorted to battery positive
- B2108 — Trunk key cylinder switch fault
- B2109 — Heated windshield relay circuit shorted to battery positive
- B2110 — Front wiper motor relay circuit open
- B2111 — Door lock input shorted to ground
- B2112 — Driver side memory set switch stuck