B2201 — No communication with the TrafficMaster module
| Meaning | The control unit is getting no response from the TrafficMaster module, the traffic information device. Code B2201 is manufacturer-defined and I can't be certain of its precise meaning on every make. It usually means the module is off, unplugged or faulty, or the data line is broken. |
| Family | Body (B) |
Typical symptoms
Traffic function cannot be selected
Error message on the navigation system
Navigation not updating routes
Other infotainment functions unstable
Common causes
Blown fuse for the module
Broken data cable or corroded connector
Internal failure of the module
Configuration expecting a module that is not fitted
Problem on the car's communication network
What to do
How to read code B2201
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code B2201 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2201 mean?
No communication with the TrafficMaster module. The control unit is getting no response from the TrafficMaster module, the traffic information device. Code B2201 is manufacturer-defined and I can't be certain of its precise meaning on every make. It usually means the module is off, unplugged or faulty, or the data line is broken.
Can I keep driving with code B2201 active?
With caution: limp mode possible, have it checked soon
Common causes — B2201
TrafficMaster module unplugged or without power Blown fuse for the module Broken data cable or corroded connector Internal failure of the module Configuration expecting a module that is not fitted Problem on the car's communication network
How do you fix code B2201?
Check the module's fuse, power supply and connectors. It is not urgent for driving. If those checks show nothing, have the code read with a tool suited to your make to see whether the module responds.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2200 — No communication with the TV module
- Next code: B2202 — No communication with the VICS module
Related codes
- B2200 — No communication with the TV module
- B2202 — No communication with the VICS module
- B2203 — Navigation CD-ROM drive fault
- B2204 — GPS antenna circuit open or shorted
- B2205 — GPS receiver fault
- B2206 — Navigation gyroscope fault
- B2207 — Control unit ROM checksum error
- B2208 — Display and switch module communication error
- B2209 — Interior lamp override switch: open circuit
- B2210 — Interior lamp override switch: short to ground
- B2211 — Low coolant lamp circuit: short to battery
- B2214 — Front passenger window: up switch short to battery