B2204 — GPS antenna circuit open or shorted
| Meaning | The control unit has detected that the GPS antenna circuit is open (broken or unplugged wire) or shorted. Code B2204 is manufacturer-defined, but the general meaning is clear: the navigation system is not getting a good satellite signal. It does not affect driving. |
| Family | Body (B) |
Typical symptoms
Navigation cannot find a GPS signal
No GPS signal message
Route not updating
Position jumping or very inaccurate
Common causes
Cable crushed or cut (for example after work on the roof or dashboard)
Damaged antenna
Short circuit in the cable or connector
Connector on the receiver not fully seated
Antenna covered by films or metallic accessories
What to do
How to read code B2204
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2204 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2204 mean?
GPS antenna circuit open or shorted. The control unit has detected that the GPS antenna circuit is open (broken or unplugged wire) or shorted. Code B2204 is manufacturer-defined, but the general meaning is clear: the navigation system is not getting a good satellite signal. It does not affect driving.
Can I keep driving with code B2204 active?
With caution: limp mode possible, have it checked soon
Common causes — B2204
Antenna cable unplugged or corroded Cable crushed or cut (for example after work on the roof or dashboard) Damaged antenna Short circuit in the cable or connector Connector on the receiver not fully seated Antenna covered by films or metallic accessories
How do you fix code B2204?
Check the antenna cable and connectors, especially if work was recently done on the audio system or dashboard. It is not urgent for driving, but until it is fixed the navigation system cannot be trusted.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact usRelated codes
- B2200 — No communication with the TV module
- B2201 — No communication with the TrafficMaster module
- B2202 — No communication with the VICS module
- B2203 — Navigation CD-ROM drive fault
- B2205 — GPS receiver fault
- B2206 — Navigation gyroscope fault
- B2207 — Control unit ROM checksum error
- B2208 — Display and switch module communication error
- B2209 — Interior lamp override switch: open circuit
- B2210 — Interior lamp override switch: short to ground
- B2211 — Low coolant lamp circuit: short to battery
- B2214 — Front passenger window: up switch short to battery