B2202 — No communication with the VICS module
| Meaning | The control unit cannot communicate with the VICS module, the traffic information system typical of vehicles for the Japanese market. Code B2202 is manufacturer-defined and I can't be certain of its meaning on every make. The reference definition also hints at the module not being fitted, so it may come from an incorrect configuration. |
| Family | Body (B) |
Typical symptoms
VICS function cannot be selected
Error message on the display
Navigation without road-condition data
Abnormal behaviour of the infotainment system
Common causes
Module unplugged or without power
Blown fuse
Broken data cable or corroded connector
Internal failure of the module
Problem on the car's communication network
What to do
How to read code B2202
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code B2202 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2202 mean?
No communication with the VICS module. The control unit cannot communicate with the VICS module, the traffic information system typical of vehicles for the Japanese market. Code B2202 is manufacturer-defined and I can't be certain of its meaning on every make. The reference definition also hints at the module not being fitted, so it may come from an incorrect configuration.
Can I keep driving with code B2202 active?
With caution: limp mode possible, have it checked soon
Common causes — B2202
Configuration expecting a VICS module that is not fitted Module unplugged or without power Blown fuse Broken data cable or corroded connector Internal failure of the module Problem on the car's communication network
How do you fix code B2202?
Check whether the car really has a VICS module, then check the fuse, power supply and connectors. There is no driving urgency. If the module is not fitted, have the control unit configuration checked with a suitable tool.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2201 — No communication with the TrafficMaster module
- Next code: B2203 — Navigation CD-ROM drive fault
Related codes
- B2200 — No communication with the TV module
- B2201 — No communication with the TrafficMaster module
- B2203 — Navigation CD-ROM drive fault
- B2204 — GPS antenna circuit open or shorted
- B2205 — GPS receiver fault
- B2206 — Navigation gyroscope fault
- B2207 — Control unit ROM checksum error
- B2208 — Display and switch module communication error
- B2209 — Interior lamp override switch: open circuit
- B2210 — Interior lamp override switch: short to ground
- B2211 — Low coolant lamp circuit: short to battery
- B2214 — Front passenger window: up switch short to battery