B2200 — No communication with the TV module
| Meaning | The control unit cannot communicate with the TV module. Code B2200 is manufacturer-defined and I can't be certain of its meaning on every make. The reference definition also mentions the module not being fitted: if your car has no TV, the code may come from a configuration that expects one anyway. |
| Family | Body (B) |
Typical symptoms
Screen shows no TV picture
No TV sound
Error message on the infotainment system
Other system functions behaving oddly
Common causes
TV module unplugged or without power
Broken data cable or corroded connector
Blown fuse for the module
Internal failure of the TV module
Problem on the car's communication network
What to do
How to read code B2200
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code B2200 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2200 mean?
No communication with the TV module. The control unit cannot communicate with the TV module. Code B2200 is manufacturer-defined and I can't be certain of its meaning on every make. The reference definition also mentions the module not being fitted: if your car has no TV, the code may come from a configuration that expects one anyway.
Can I keep driving with code B2200 active?
With caution: limp mode possible, have it checked soon
Common causes — B2200
Control unit configured for a TV module that is not fitted TV module unplugged or without power Broken data cable or corroded connector Blown fuse for the module Internal failure of the TV module Problem on the car's communication network
How do you fix code B2200?
Check whether the car really has a TV module; then check the fuse, power supply and connectors. There is no driving urgency. If the module does not exist, the control unit configuration needs to be checked with a suitable tool.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2199 — VICS module fault (traffic information)
- Next code: B2201 — No communication with the TrafficMaster module
Related codes
- B2201 — No communication with the TrafficMaster module
- B2202 — No communication with the VICS module
- B2203 — Navigation CD-ROM drive fault
- B2204 — GPS antenna circuit open or shorted
- B2205 — GPS receiver fault
- B2206 — Navigation gyroscope fault
- B2207 — Control unit ROM checksum error
- B2208 — Display and switch module communication error
- B2209 — Interior lamp override switch: open circuit
- B2210 — Interior lamp override switch: short to ground
- B2211 — Low coolant lamp circuit: short to battery
- B2214 — Front passenger window: up switch short to battery