Skip to content
Fault code dictionary (DTC)

C1401 — Traction control valve right front: open circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis is a manufacturer-defined code, so details vary by brand. The module sees the right front (RF) traction control valve circuit as broken, as if a wire were disconnected or the coil failed. The valve cannot be commanded.
FamilyChassis (C)

Typical symptoms

Traction control warning light on
Traction and stability control disabled
ABS light on in some models
Right front wheel spinning on slippery roads
Fault message on the dashboard

Common causes

Broken wire or unplugged connector
Corroded connector terminals
Open valve coil
Faulty hydraulic unit
Cut or chafed wiring

What to do

Check the connector and the continuity of the wiring to the valve. The car can usually be driven, but without traction control: drive carefully in the wet and have it checked soon.

How to read code C1401

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1401 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1401 mean?

Traction control valve right front: open circuit. This is a manufacturer-defined code, so details vary by brand. The module sees the right front (RF) traction control valve circuit as broken, as if a wire were disconnected or the coil failed. The valve cannot be commanded.

Can I keep driving with code C1401 active?

With caution: limp mode possible, have it checked soon

Common causes — C1401

Broken wire or unplugged connector Corroded connector terminals Open valve coil Faulty hydraulic unit Cut or chafed wiring

How do you fix code C1401?

Check the connector and the continuity of the wiring to the valve. The car can usually be driven, but without traction control: drive carefully in the wet and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes