Skip to content
Fault code dictionary (DTC)

C1402 — Traction control valve right front: short to ground

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThis is a manufacturer-defined code, so details vary by brand. The module sees the right front (RF) traction control valve circuit connected to ground, for example from a wire touching the body. The system may shut down traction control.
FamilyChassis (C)

Typical symptoms

Traction control warning light on
Traction and stability control disabled
ABS light on in some models
Fault message on the dashboard
Wheels spinning on slippery roads

Common causes

Wire with worn insulation touching ground
Water or corrosion in the connector
Shorted valve coil
Faulty hydraulic unit
Pinched or chafed wiring

What to do

Look for chafed or pinched wires and moisture in the valve connector. The car can usually be driven, but with less traction help: drive carefully and have it checked soon.

How to read code C1402

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code C1402 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code C1402 mean?

Traction control valve right front: short to ground. This is a manufacturer-defined code, so details vary by brand. The module sees the right front (RF) traction control valve circuit connected to ground, for example from a wire touching the body. The system may shut down traction control.

Can I keep driving with code C1402 active?

With caution: limp mode possible, have it checked soon

Common causes — C1402

Wire with worn insulation touching ground Water or corrosion in the connector Shorted valve coil Faulty hydraulic unit Pinched or chafed wiring

How do you fix code C1402?

Look for chafed or pinched wires and moisture in the valve connector. The car can usually be driven, but with less traction help: drive carefully and have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes