C1407 — Rear traction control valve circuit shorted to battery
| Meaning | The control unit has detected battery voltage on the rear traction control valve circuit where it should not be. Code C1407 is manufacturer-defined and the exact meaning can vary between brands. It usually points to a wire touching a live cable, or a fault inside the valve or the control unit. |
| Family | Chassis (C) |
Typical symptoms
Traction control out of service
Possible ABS light on
Stability system fault message
Unreliable electronic aids when the wheels lose grip
Common causes
Damaged harness insulation or connector
Faulty valve coil in the hydraulic unit
Earlier wiring repairs done poorly
Brake control unit with a faulty internal driver
What to do
How to read code C1407
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1407 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1407 mean?
Rear traction control valve circuit shorted to battery. The control unit has detected battery voltage on the rear traction control valve circuit where it should not be. Code C1407 is manufacturer-defined and the exact meaning can vary between brands. It usually points to a wire touching a live cable, or a fault inside the valve or the control unit.
Can I keep driving with code C1407 active?
With caution: limp mode possible, have it checked soon
Common causes — C1407
Valve wire touching a power supply cable Damaged harness insulation or connector Faulty valve coil in the hydraulic unit Earlier wiring repairs done poorly Brake control unit with a faulty internal driver
How do you fix code C1407?
Check the wiring and connectors of the ABS hydraulic unit, looking for rubbed wires or makeshift repairs. The stability system cannot be relied on while the fault is present, so have the car checked fairly soon and leave larger safety margins when driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1406 — Rear traction control valve circuit shorted to gro...
- Next code: C1410 — Left front traction control valve circuit failure
Related codes
- C1400 — Traction control valve right front: circuit failure
- C1401 — Traction control valve right front: open circuit
- C1402 — Traction control valve right front: short to ground
- C1403 — Traction control valve right front: short to battery
- C1404 — Traction control valve rear: circuit failure
- C1405 — Rear traction control valve circuit open
- C1406 — Rear traction control valve circuit shorted to ground
- C1410 — Left front traction control valve circuit failure
- C1411 — Left front traction control valve circuit open
- C1412 — Left front traction control valve circuit shorted to ground
- C1413 — Left front traction control valve circuit shorted to battery
- C1414 — Incorrect module design level