C1405 — Rear traction control valve circuit open
| Meaning | The control unit has detected that the electrical circuit of the rear traction control valve is broken: power is not reaching the valve or the signal is not coming back. Code C1405 is manufacturer-defined and its exact meaning can differ between brands. I am reading it according to the generic definition, meaning an electrical problem in the circuit rather than necessarily the valve itself. |
| Family | Chassis (C) |
Typical symptoms
Traction control switched off or not working
Possible ABS light on together with the others
Rear wheels spinning more easily on slippery surfaces
Brake or stability system fault message on the dashboard
Common causes
Broken or damaged wire along the harness, often near the wheels
Valve coil open inside the hydraulic unit
Fuse or power supply problem in the brake system
Faulty ABS/traction control module, less common
What to do
How to read code C1405
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1405 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1405 mean?
Rear traction control valve circuit open. The control unit has detected that the electrical circuit of the rear traction control valve is broken: power is not reaching the valve or the signal is not coming back. Code C1405 is manufacturer-defined and its exact meaning can differ between brands. I am reading it according to the generic definition, meaning an electrical problem in the circuit rather than necessarily the valve itself.
Can I keep driving with code C1405 active?
With caution: limp mode possible, have it checked soon
Common causes — C1405
Corroded or loose connector at the valve or brake control unit Broken or damaged wire along the harness, often near the wheels Valve coil open inside the hydraulic unit Fuse or power supply problem in the brake system Faulty ABS/traction control module, less common
How do you fix code C1405?
First check the fuses and the connectors on the ABS hydraulic unit, then the wiring running towards the rear. Normal braking usually remains available, but the electronic grip aids do not, so drive carefully and have the car checked fairly soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1404 — Traction control valve rear: circuit failure
- Next code: C1406 — Rear traction control valve circuit shorted to gro...
Related codes
- C1400 — Traction control valve right front: circuit failure
- C1401 — Traction control valve right front: open circuit
- C1402 — Traction control valve right front: short to ground
- C1403 — Traction control valve right front: short to battery
- C1404 — Traction control valve rear: circuit failure
- C1406 — Rear traction control valve circuit shorted to ground
- C1407 — Rear traction control valve circuit shorted to battery
- C1410 — Left front traction control valve circuit failure
- C1411 — Left front traction control valve circuit open
- C1412 — Left front traction control valve circuit shorted to ground
- C1413 — Left front traction control valve circuit shorted to battery
- C1414 — Incorrect module design level