C1406 — Rear traction control valve circuit shorted to ground
| Meaning | The control unit has found the rear traction control valve circuit connected to ground when it should not be. Code C1406 is manufacturer-defined, so the precise meaning depends on the brand. In practice the wire or the valve coil is draining the current sent by the control unit into the chassis. |
| Family | Chassis (C) |
Typical symptoms
Traction control switched off
ABS light on in some cases
Possible blown brake system fuse
No stability aids on wet or loose surfaces
Common causes
Connector with water or corrosion creating a path to ground
Valve coil shorted inside the hydraulic unit
Harness pinched or rubbed near the wheels or underbody
Damaged brake control unit, less common
What to do
How to read code C1406
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1406 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1406 mean?
Rear traction control valve circuit shorted to ground. The control unit has found the rear traction control valve circuit connected to ground when it should not be. Code C1406 is manufacturer-defined, so the precise meaning depends on the brand. In practice the wire or the valve coil is draining the current sent by the control unit into the chassis.
Can I keep driving with code C1406 active?
With caution: limp mode possible, have it checked soon
Common causes — C1406
Wire with damaged insulation touching the chassis Connector with water or corrosion creating a path to ground Valve coil shorted inside the hydraulic unit Harness pinched or rubbed near the wheels or underbody Damaged brake control unit, less common
How do you fix code C1406?
Have the brake system wiring inspected for rubbed wires and wet connectors, starting at the hydraulic unit. Do not ignore it for long, because the electronic grip aids are unavailable; basic braking usually still works.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1405 — Rear traction control valve circuit open
- Next code: C1407 — Rear traction control valve circuit shorted to bat...
Related codes
- C1400 — Traction control valve right front: circuit failure
- C1401 — Traction control valve right front: open circuit
- C1402 — Traction control valve right front: short to ground
- C1403 — Traction control valve right front: short to battery
- C1404 — Traction control valve rear: circuit failure
- C1405 — Rear traction control valve circuit open
- C1407 — Rear traction control valve circuit shorted to battery
- C1410 — Left front traction control valve circuit failure
- C1411 — Left front traction control valve circuit open
- C1412 — Left front traction control valve circuit shorted to ground
- C1413 — Left front traction control valve circuit shorted to battery
- C1414 — Incorrect module design level