P0108 — Manifold Absolute Pressure/Barometric Pressure Circuit High Input
| Meaning | Manifold Absolute Pressure/Barometric Pressure Circuit High Input. |
| Family | Powertrain (P) |
How to read code P0108
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0108 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (08) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0108 mean?
Manifold Absolute Pressure/Barometric Pressure Circuit High Input.
Can I keep driving with code P0108 active?
Yes, no known limitation
How do you fix code P0108?
Diagnosis starts from reading the live ECU parameters: the code points to the fault area, not to the part to replace. A vehicle-electronics specialist can test the component and clear the code after the repair.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0107 — Manifold Absolute Pressure/Barometric Pressure Cir...
- Next code: P0109 — Manifold Absolute Pressure/Barometric Pressure Cir...
Related codes
- P0100 — Mass or Volume Air flow Circuit Malfunction
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass or Volume Air flow Circuit High Input
- P0104 — Mass or Volume Air flow Circuit Intermittent
- P0105 — Manifold Absolute Pressure/Barometric Pressure Circuit Malfu...
- P0106 — Manifold Absolute Pressure/Barometric Pressure Circuit Range...
- P0107 — Manifold Absolute Pressure/Barometric Pressure Circuit Low I...
- P0109 — Manifold Absolute Pressure/Barometric Pressure Circuit Inter...
- P0110 — Intake Air Temperature Circuit Malfunction
- P0111 — Intake Air Temperature Circuit Range/Performance Problem
- P0112 — Intake Air Temperature Circuit Low Input