P030D — Ignition B control signal circuit open
| Meaning | The control unit found that the circuit controlling the ignition labelled "B" is broken. The letter B is assigned by the manufacturer and may correspond to a cylinder, a coil or a group of cylinders, so make-specific data is needed. It can come from a wire, a connector or a faulty module. |
| Family | Powertrain (P) |
Typical symptoms
Jerky or uneven engine running
Misfires on one or more cylinders
Loss of power
Difficulty starting
Common causes
Broken control wire
Faulty ignition coil or module
Missing power to the circuit
Failed driver stage in the control unit
What to do
How to read code P030D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P030D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (0D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P030D mean?
Ignition B control signal circuit open. The control unit found that the circuit controlling the ignition labelled "B" is broken. The letter B is assigned by the manufacturer and may correspond to a cylinder, a coil or a group of cylinders, so make-specific data is needed. It can come from a wire, a connector or a faulty module.
Can I keep driving with code P030D active?
With caution: limp mode possible, have it checked soon
Common causes — P030D
Coil or module connector unplugged or corroded Broken control wire Faulty ignition coil or module Missing power to the circuit Failed driver stage in the control unit
How do you fix code P030D?
Have the connector and wiring of ignition coil or module B checked first. If the engine runs jerkily do not push on, because unburned fuel damages the catalytic converter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P030C — Ignition A control signal circuit high
- Next code: P030E — Ignition B control signal circuit low
Related codes
- P0300 — Random/multiple cylinder misfire
- P0301 — Cylinder 1 misfire
- P0302 — Cylinder 2 Misfire Detected
- P0303 — Cylinder 3 Misfire Detected
- P0304 — Cylinder 4 Misfire Detected
- P0305 — Cylinder 5 misfire detected
- P0306 — Cylinder 6 misfire detected
- P0307 — Cylinder 7 misfire detected
- P0308 — Cylinder 8 misfire detected
- P0309 — Cylinder 9 misfire detected
- P030A — Ignition A control signal circuit open
- P030B — Ignition A control signal circuit low