Skip to content
Fault code dictionary (DTC)

P06F9 — Glow plug control module 2 system voltage out of range

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the supply voltage of the second glow plug module is outside the expected values, either too low or too high. Without correct power the module cannot manage preheating properly.
FamilyPowertrain (P)

Typical symptoms

Hard starting when cold
Glow plug light or check engine light on
White or gray smoke at start-up
Other electrical malfunctions
Battery that discharges easily

Common causes

Weak or discharged battery
Poorly charging alternator
Corroded or loose power cables or grounds
Faulty fuse or power relay for the module
Internal fault in the glow plug module

What to do

Have the battery, alternator, cables and grounds checked first, since a power problem usually affects several systems. Don't ignore it: it can leave you stranded.

How to read code P06F9

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P06F9 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (F9) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P06F9 mean?

Glow plug control module 2 system voltage out of range. The control unit detected that the supply voltage of the second glow plug module is outside the expected values, either too low or too high. Without correct power the module cannot manage preheating properly.

Can I keep driving with code P06F9 active?

With caution: limp mode possible, have it checked soon

Common causes — P06F9

Weak or discharged battery Poorly charging alternator Corroded or loose power cables or grounds Faulty fuse or power relay for the module Internal fault in the glow plug module

How do you fix code P06F9?

Have the battery, alternator, cables and grounds checked first, since a power problem usually affects several systems. Don't ignore it: it can leave you stranded.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes