P06FC — Glow plug control module 2 to engine control unit communication
| Meaning | The engine control unit detected a communication problem with the second glow plug module: messages do not arrive, arrive incomplete or contain errors. The fault may be in the data link or in one of the two devices. |
| Family | Powertrain (P) |
Typical symptoms
Hard starting when cold
Irregular or absent preheating
White or gray smoke at start-up
Other communication codes stored
Common causes
Irregular module power supply or grounds
Internal fault in the glow plug module
Problem in the engine control unit
Electrical noise or weak battery
What to do
How to read code P06FC
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P06FC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (6) points to computer and output circuits, and the last two (FC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P06FC mean?
Glow plug control module 2 to engine control unit communication. The engine control unit detected a communication problem with the second glow plug module: messages do not arrive, arrive incomplete or contain errors. The fault may be in the data link or in one of the two devices.
Can I keep driving with code P06FC active?
With caution: limp mode possible, have it checked soon
Common causes — P06FC
Damaged or corroded data line wiring or connector Irregular module power supply or grounds Internal fault in the glow plug module Problem in the engine control unit Electrical noise or weak battery
How do you fix code P06FC?
Have the communication line, the connectors and the module power supply checked, and the battery verified. If the car starts poorly when cold, it is best to act soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P06FB — Glow plug control module 2 memory checksum error
- Next code: P06FD — Glow plug module 2: faulty link with the engine co...
Related codes
- P0600 — Serial communication link malfunction
- P0601 — Internal Control Module Memory Check Sum Error
- P0602 — Control module programming error
- P0603 — Internal Control Module Keep Alive Memory (KAM) Error
- P0604 — Internal control module RAM error
- P0605 — Internal Control Module Read Only Memory (ROM) Error
- P0606 — Control module processor fault
- P0607 — Control module performance out of range
- P0608 — Control module speed signal output A malfunction
- P0609 — Control module speed signal output B malfunction
- P060A — Internal control module monitoring processor fault
- P060B — Internal control module A/D conversion fault