Skip to content
Fault code dictionary (DTC)

P0D11 — Charging negative contactor A control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found the circuit that drives charging negative contactor A to be broken. Without this command the contactor cannot be operated properly. Charging may be prevented.
FamilyPowertrain (P)

Typical symptoms

Charging does not start
Warning light for the hybrid/electric system
No click when the plug is inserted
Error message about charging
Possibly reduced power

Common causes

Broken control wire
Loose or oxidized connector
Broken contactor coil
Fuse or power supply to the control
Battery control unit with a faulty output

What to do

See whether any warnings show on the dashboard and try charging with another cable. Checking the contactor wiring requires a workshop qualified for high voltage. Do not open the battery pack.

How to read code P0D11

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D11 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D11 mean?

Charging negative contactor A control circuit open. The control unit found the circuit that drives charging negative contactor A to be broken. Without this command the contactor cannot be operated properly. Charging may be prevented.

Can I keep driving with code P0D11 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D11

Broken control wire Loose or oxidized connector Broken contactor coil Fuse or power supply to the control Battery control unit with a faulty output

How do you fix code P0D11?

See whether any warnings show on the dashboard and try charging with another cable. Checking the contactor wiring requires a workshop qualified for high voltage. Do not open the battery pack.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes