Skip to content
Fault code dictionary (DTC)

P0D18 — Charging high-voltage interlock circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module measured a higher than expected voltage in the safety loop (interlock) of the charging system. This usually points to a short to supply voltage along the loop. For safety the system may block charging or the high voltage. Details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Charging unavailable
Hybrid/electric warning light on
Error message on the display
Electric mode not enabled
Limited power

Common causes

Interlock wire shorted to supply voltage
Damaged or deformed connector
Wiring damaged by chafing or heat
Failed component in the loop
Fault in the reading module

What to do

Do not work on the high-voltage system: this needs a qualified technician. Mention if the problem appeared after work on the car or an impact. Have it checked soon.

How to read code P0D18

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D18 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D18 mean?

Charging high-voltage interlock circuit high. The control module measured a higher than expected voltage in the safety loop (interlock) of the charging system. This usually points to a short to supply voltage along the loop. For safety the system may block charging or the high voltage. Details depend on the manufacturer.

Can I keep driving with code P0D18 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D18

Interlock wire shorted to supply voltage Damaged or deformed connector Wiring damaged by chafing or heat Failed component in the loop Fault in the reading module

How do you fix code P0D18?

Do not work on the high-voltage system: this needs a qualified technician. Mention if the problem appeared after work on the car or an impact. Have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes