Skip to content
Fault code dictionary (DTC)

P0D1C — Battery coolant control valve B stuck on

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected that valve B of the traction battery cooling circuit stays in the active position even when it should change. Coolant may therefore flow where it should not, and the battery may be cooled too much or too little. Details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid/electric warning light on
Battery slow to warm up in cold weather
Slower than normal charging
Reduced range or power in some conditions
Fans or pump running longer

Common causes

Mechanically jammed valve
Faulty valve motor
Faulty valve position sensor
Wrong command signal from the module
Dirt in the circuit

What to do

Do not work on orange parts. Note whether the problem changes with outside temperature. Have the valve checked soon.

How to read code P0D1C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D1C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D1C mean?

Battery coolant control valve B stuck on. The control module detected that valve B of the traction battery cooling circuit stays in the active position even when it should change. Coolant may therefore flow where it should not, and the battery may be cooled too much or too little. Details depend on the manufacturer.

Can I keep driving with code P0D1C active?

With caution: limp mode possible, have it checked soon

Common causes — P0D1C

Mechanically jammed valve Faulty valve motor Faulty valve position sensor Wrong command signal from the module Dirt in the circuit

How do you fix code P0D1C?

Do not work on orange parts. Note whether the problem changes with outside temperature. Have the valve checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes