P0D1F — Control module date/time synchronization error
| Meaning | A control module detected that the date and time received from another module do not match or did not arrive. This clock is used, for example, for scheduled charging and on-board logs. It is a minor code in itself, but its precise meaning and the modules involved depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Scheduled charging not starting at the set time
Warning light sometimes on
Time settings resetting
No obvious symptom
Common causes
Incomplete software update
Communication problem on the module network
Faulty module providing the time
Time sync via phone or network failed
What to do
How to read code P0D1F
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D1F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D1F mean?
Control module date/time synchronization error. A control module detected that the date and time received from another module do not match or did not arrive. This clock is used, for example, for scheduled charging and on-board logs. It is a minor code in itself, but its precise meaning and the modules involved depend on the manufacturer.
Can I keep driving with code P0D1F active?
With caution: limp mode possible, have it checked soon
Common causes — P0D1F
12 V battery flat or recently disconnected Incomplete software update Communication problem on the module network Faulty module providing the time Time sync via phone or network failed
How do you fix code P0D1F?
First check the 12 V battery and reset the date and time from the display. If the code returns or there are other faults, have the modules scanned. It is usually not urgent, but do not ignore it if other problems appear.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D1E — Battery coolant control valve B control circuit hi...
- Next code: P0D20 — Battery charger A output voltage performance
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range