Skip to content
Fault code dictionary (DTC)

P0D60 — HV battery cooling fan 2 sense, signal implausible

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe sense signal from the second fan that cools the high-voltage battery is present, but doesn't match what the control unit expects: the fan may be turning too slowly, too fast or irregularly. The exact name of fan 2 varies from model to model.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Abnormal noise from the fan or battery area
Battery getting hotter than normal
Reduced power under acceleration or charging
Fan running at a different speed than usual

Common causes

Dirty, worn fan or damaged bearings
Blocked air ducts or filter
Connector with abnormal resistance
Faulty fan speed sensor
Unstable power supply
Fault in the control unit

What to do

Have the fan, filter and battery air ducts checked soon. Insufficient cooling can cut performance and, over time, stress the battery. Don't work on high voltage yourself.

How to read code P0D60

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D60 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D60 mean?

HV battery cooling fan 2 sense, signal implausible. The sense signal from the second fan that cools the high-voltage battery is present, but doesn't match what the control unit expects: the fan may be turning too slowly, too fast or irregularly. The exact name of fan 2 varies from model to model.

Can I keep driving with code P0D60 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D60

Dirty, worn fan or damaged bearings Blocked air ducts or filter Connector with abnormal resistance Faulty fan speed sensor Unstable power supply Fault in the control unit

How do you fix code P0D60?

Have the fan, filter and battery air ducts checked soon. Insufficient cooling can cut performance and, over time, stress the battery. Don't work on high voltage yourself.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes