Skip to content
Fault code dictionary (DTC)

P0D70 — A/C compressor control module internal temperature sensor A circuit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe module that controls the A/C compressor has a sensor that measures its own internal temperature. The control unit detected a fault in this sensor's circuit, so it can no longer monitor the module for overheating.
FamilyPowertrain (P)

Typical symptoms

Hybrid system or check engine light on
A/C not cooling
Compressor limited or disabled
A/C warning message
Rest of the car normal

Common causes

Faulty internal temperature sensor
Damaged module connector or wiring
Failed compressor module
Moisture in the connectors
Faulty control unit (rare)

What to do

Have the connectors and wiring checked, and the module data read, at a workshop qualified for high voltage. The sensor is often inside the compressor and cannot be replaced on its own. You can drive, but without air conditioning.

How to read code P0D70

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D70 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D70 mean?

A/C compressor control module internal temperature sensor A circuit. The module that controls the A/C compressor has a sensor that measures its own internal temperature. The control unit detected a fault in this sensor's circuit, so it can no longer monitor the module for overheating.

Can I keep driving with code P0D70 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D70

Faulty internal temperature sensor Damaged module connector or wiring Failed compressor module Moisture in the connectors Faulty control unit (rare)

How do you fix code P0D70?

Have the connectors and wiring checked, and the module data read, at a workshop qualified for high voltage. The sensor is often inside the compressor and cannot be replaced on its own. You can drive, but without air conditioning.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes