Skip to content
Fault code dictionary (DTC)

P0DAE — Hybrid Battery Pack Voltage Variation

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe powertrain control module has detected an abnormal voltage difference among the sections of the hybrid battery pack. This means some cells are not holding or discharging their charge at the same rate as the others, creating an imbalance in the system.
FamilyPowertrain (P)

Typical symptoms

The check engine light and hybrid system warning lights are on
Noticeable reduction in electric-only driving range
The engine starts more frequently to compensate for battery power loss

Common causes

Degraded or worn-out individual battery cells within the pack
Loose or corroded electrical bus bars connecting the battery modules
A failing battery control module or temperature sensor reading errors

What to do

Have a technician run a detailed diagnostic scan on the hybrid battery pack to check individual cell voltages and module temperatures. Avoid heavy acceleration and get it checked soon to prevent further stress on the weaker cells.

How to read code P0DAE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0DAE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0DAE mean?

Hybrid Battery Pack Voltage Variation. The powertrain control module has detected an abnormal voltage difference among the sections of the hybrid battery pack. This means some cells are not holding or discharging their charge at the same rate as the others, creating an imbalance in the system.

Can I keep driving with code P0DAE active?

With caution: limp mode possible, have it checked soon

Common causes — P0DAE

Degraded or worn-out individual battery cells within the pack Loose or corroded electrical bus bars connecting the battery modules A failing battery control module or temperature sensor reading errors

How do you fix code P0DAE?

Have a technician run a detailed diagnostic scan on the hybrid battery pack to check individual cell voltages and module temperatures. Avoid heavy acceleration and get it checked soon to prevent further stress on the weaker cells.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes