P0DE5 — Charge status indicator B control circuit open
| Meaning | The controller detected an open circuit or break in the control of indicator B, which shows charging status, for example a light or ring at the charging socket. It is usually a problem with the display and not with the charging itself. Which indicator counts as B depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging system warning light on
Uncertainty whether the car is charging
Charging works normally but with no signal
Common causes
Faulty indicator light
Corroded contact near the charging socket
Fault in the module that drives the indicator
Wiring damage after an impact or repair
What to do
How to read code P0DE5
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0DE5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0DE5 mean?
Charge status indicator B control circuit open. The controller detected an open circuit or break in the control of indicator B, which shows charging status, for example a light or ring at the charging socket. It is usually a problem with the display and not with the charging itself. Which indicator counts as B depends on the manufacturer.
Can I keep driving with code P0DE5 active?
With caution: limp mode possible, have it checked soon
Common causes — P0DE5
Broken wire or disconnected plug to the indicator Faulty indicator light Corroded contact near the charging socket Fault in the module that drives the indicator Wiring damage after an impact or repair
How do you fix code P0DE5?
Confirm on the dashboard or in the app that charging is really happening. Have the indicator wiring checked at a workshop without great hurry, unless charging itself is not working.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0DE4 — Electric/auxiliary transmission fluid pump A motor...
- Next code: P0DE6 — Hybrid/EV battery pack cell voltage low
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range