Skip to content
Fault code dictionary (DTC)

P0DF2 — Generator inverter temperature sensor C circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found an electrical fault in the circuit of temperature sensor C of the generator inverter. This sensor is used to make sure the power electronics of the hybrid car don't overheat. The code is standard, but I have no reliable information on where sensor C is physically located on your make.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light on
Reduced power or limp mode
Combustion engine running more often than normal
Error message on the dashboard
Weaker performance than usual

Common causes

Damaged or corroded sensor connector or wiring
Faulty temperature sensor
Insufficient inverter cooling
Faulty internal electronics in the inverter
Irregular sensor ground or power

What to do

Have the live data read to see whether the indicated temperature makes sense, then check the sensor connectors and wiring. If power drops, stop as soon as it is safe. Don't touch the orange high-voltage components: only qualified technicians should work on them.

How to read code P0DF2

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0DF2 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0DF2 mean?

Generator inverter temperature sensor C circuit fault. The control unit found an electrical fault in the circuit of temperature sensor C of the generator inverter. This sensor is used to make sure the power electronics of the hybrid car don't overheat. The code is standard, but I have no reliable information on where sensor C is physically located on your make.

Can I keep driving with code P0DF2 active?

With caution: limp mode possible, have it checked soon

Common causes — P0DF2

Damaged or corroded sensor connector or wiring Faulty temperature sensor Insufficient inverter cooling Faulty internal electronics in the inverter Irregular sensor ground or power

How do you fix code P0DF2?

Have the live data read to see whether the indicated temperature makes sense, then check the sensor connectors and wiring. If power drops, stop as soon as it is safe. Don't touch the orange high-voltage components: only qualified technicians should work on them.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes