Skip to content
Fault code dictionary (DTC)

P0DF5 — Generator inverter temperature sensor B low signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit sees a lower voltage than expected on the circuit of temperature sensor B of the generator inverter. This usually means a wire shorted to ground or a faulty sensor. Depending on the sensor type, the unit may read it as a very high or very low temperature. Which sensor is called B depends on the manufacturer, and I can't say with certainty.
FamilyPowertrain (P)

Typical symptoms

Hybrid system warning light on
Reduced power or limp mode
Cooling fans running more than normal
Error message on the dashboard
Combustion engine on more often

Common causes

Sensor wire shorted to ground
Faulty temperature sensor
Wet or damaged connector
Pinched or damaged wiring
Internal fault in the inverter

What to do

Check the sensor wiring for spots where the insulation is damaged or the wire touches the bodywork, and check the connector. If power is limited, use the car only to reach a workshop, because the control unit no longer trusts the inverter temperature reading.

How to read code P0DF5

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0DF5 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0DF5 mean?

Generator inverter temperature sensor B low signal. The control unit sees a lower voltage than expected on the circuit of temperature sensor B of the generator inverter. This usually means a wire shorted to ground or a faulty sensor. Depending on the sensor type, the unit may read it as a very high or very low temperature. Which sensor is called B depends on the manufacturer, and I can't say with certainty.

Can I keep driving with code P0DF5 active?

With caution: limp mode possible, have it checked soon

Common causes — P0DF5

Sensor wire shorted to ground Faulty temperature sensor Wet or damaged connector Pinched or damaged wiring Internal fault in the inverter

How do you fix code P0DF5?

Check the sensor wiring for spots where the insulation is damaged or the wire touches the bodywork, and check the connector. If power is limited, use the car only to reach a workshop, because the control unit no longer trusts the inverter temperature reading.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes