B1603 — Anti-theft indicator lamp circuit failure
| Meaning | The control module detected a fault in the anti-theft indicator circuit, without telling whether the wire is open or touching positive or ground. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. It concerns the indicator, not the anti-theft system itself. |
| Family | Body (B) |
Typical symptoms
Light stays always on or always off
Car starts normally
A body fault message may appear
Sometimes no obvious symptom
Common causes
Damaged indicator wiring
Cluster or module connector with corroded contacts
Fault in the module that drives the indicator
Instrument cluster problem
What to do
How to read code B1603
This is an informational entry: it normally does not limit how the vehicle works.
The code B1603 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1603 mean?
Anti-theft indicator lamp circuit failure. The control module detected a fault in the anti-theft indicator circuit, without telling whether the wire is open or touching positive or ground. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. It concerns the indicator, not the anti-theft system itself.
Can I keep driving with code B1603 active?
With caution: limp mode possible, have it checked soon
Common causes — B1603
Faulty indicator bulb or LED Damaged indicator wiring Cluster or module connector with corroded contacts Fault in the module that drives the indicator Instrument cluster problem
How do you fix code B1603?
See whether the light behaves normally when the ignition is switched on. Then have the indicator, connectors and wiring checked. It is usually not urgent, but should not be ignored because you might miss other anti-theft problems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1602 — PATS anti-theft: invalid key code format from tran...
- Next code: B1604 — Anti-theft indicator lamp circuit open
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure
- B1612 — Rear wiper mode select switch circuit open