B1606 — Anti-theft indicator lamp circuit shorted to ground
| Meaning | The control module detected the anti-theft indicator circuit touching ground. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. The light may stay on or not work. |
| Family | Body (B) |
Typical symptoms
Light stays fixed on or off
Car starts normally
A body fault message may appear
Sometimes no obvious symptom
Common causes
Connector with moisture or dirt
Indicator or LED shorted
Instrument cluster or module fault
Wiring modified or poorly repaired
What to do
How to read code B1606
This is an informational entry: it normally does not limit how the vehicle works.
The code B1606 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1606 mean?
Anti-theft indicator lamp circuit shorted to ground. The control module detected the anti-theft indicator circuit touching ground. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. The light may stay on or not work.
Can I keep driving with code B1606 active?
With caution: limp mode possible, have it checked soon
Common causes — B1606
Indicator wire pinched or with damaged insulation touching the bodywork Connector with moisture or dirt Indicator or LED shorted Instrument cluster or module fault Wiring modified or poorly repaired
How do you fix code B1606?
Watch how the light behaves with the ignition on and off. Have the wiring and connectors checked, especially where wires pass near metal parts. It is not urgent for driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1605 — Anti-theft indicator lamp circuit shorted to batte...
- Next code: B1607 — Illuminated entry input circuit failure
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure
- B1612 — Rear wiper mode select switch circuit open