B1612 — Rear wiper mode select switch circuit open
| Meaning | The control module detects the circuit of the switch that selects the rear wiper mode as interrupted. This code is manufacturer-defined: the wording matches Ford-type vehicles, and for other brands I have no reliable detail. The switch signal does not reach the module. |
| Family | Body (B) |
Typical symptoms
Works only in some switch positions
Problem may depend on tailgate movement
Rear washer may not respond
Sometimes no obvious symptom
Common causes
Disconnected or corroded connector
Broken wiper switch or stalk
Fault in the body module
Circuit power supply missing
What to do
How to read code B1612
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1612 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1612 mean?
Rear wiper mode select switch circuit open. The control module detects the circuit of the switch that selects the rear wiper mode as interrupted. This code is manufacturer-defined: the wording matches Ford-type vehicles, and for other brands I have no reliable detail. The switch signal does not reach the module.
Can I keep driving with code B1612 active?
With caution: limp mode possible, have it checked soon
Common causes — B1612
Broken wire, often in the body-to-tailgate passage Disconnected or corroded connector Broken wiper switch or stalk Fault in the body module Circuit power supply missing
How do you fix code B1612?
Check in which positions the switch does not respond. Then have the wiring in the flexible passages, connectors and switch inspected. It is not urgent, but rear visibility suffers in rain.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1611 — Rear wiper mode select switch circuit failure
- Next code: B1613 — Rear wiper mode select switch shorted to battery
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure