B1605 — Anti-theft indicator lamp circuit shorted to battery
| Meaning | The control module detected the anti-theft indicator circuit touching battery positive. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. The wire is receiving voltage it should not have. |
| Family | Body (B) |
Typical symptoms
Light no longer flashes
Car starts normally
A body fault message may appear
Possible slow battery drain if the light stays on with the ignition off
Common causes
Damaged or damp connector
Faulty indicator or driver module
Instrument cluster fault
Earlier poor wiring repair
What to do
How to read code B1605
This is an informational entry: it normally does not limit how the vehicle works.
The code B1605 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1605 mean?
Anti-theft indicator lamp circuit shorted to battery. The control module detected the anti-theft indicator circuit touching battery positive. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. The wire is receiving voltage it should not have.
Can I keep driving with code B1605 active?
With caution: limp mode possible, have it checked soon
Common causes — B1605
Indicator wire with damaged insulation touching positive Damaged or damp connector Faulty indicator or driver module Instrument cluster fault Earlier poor wiring repair
How do you fix code B1605?
If the light stays on with the car off, check soon because it could drain the battery. Then have the wiring and connectors inspected. It does not affect driving, but should be looked at fairly soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1604 — Anti-theft indicator lamp circuit open
- Next code: B1606 — Anti-theft indicator lamp circuit shorted to groun...
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure
- B1612 — Rear wiper mode select switch circuit open