B1604 — Anti-theft indicator lamp circuit open
| Meaning | The control module detects that the anti-theft indicator circuit is open, meaning no current flows. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. Usually the light no longer comes on. |
| Family | Body (B) |
Typical symptoms
Car starts normally
No more visual confirmation that the system is armed
A body fault message may appear
Sometimes no other symptom
Common causes
Broken wire or disconnected connector
Corroded contacts in the connector
Fault in the instrument cluster or module
Damaged printed circuit track
What to do
How to read code B1604
This is an informational entry: it normally does not limit how the vehicle works.
The code B1604 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1604 mean?
Anti-theft indicator lamp circuit open. The control module detects that the anti-theft indicator circuit is open, meaning no current flows. This code is manufacturer-defined: the wording matches Ford-type vehicles, and on other brands the meaning may differ. Usually the light no longer comes on.
Can I keep driving with code B1604 active?
With caution: limp mode possible, have it checked soon
Common causes — B1604
Burnt-out indicator bulb or LED Broken wire or disconnected connector Corroded contacts in the connector Fault in the instrument cluster or module Damaged printed circuit track
How do you fix code B1604?
Check whether the light comes on briefly when you switch the ignition on. If not, have the bulb, connectors and wiring checked. It is not urgent for driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1603 — Anti-theft indicator lamp circuit failure
- Next code: B1605 — Anti-theft indicator lamp circuit shorted to batte...
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure
- B1612 — Rear wiper mode select switch circuit open