B1698 — Mirror driver/passenger switch circuit short to ground
| Meaning | The control unit detected an unintended connection to ground on the mirror selector switch circuit. The exact meaning is set by the manufacturer and I have no reliable information for your brand: the reference definition describes a short to ground. |
| Family | Body (B) |
Typical symptoms
You cannot choose which mirror to adjust
The mirror control works intermittently
One of the two mirrors stays still
Common causes
Mirror switch with faulty contacts or liquid ingress
Corroded door connector
Wiring damaged by repeated door opening
Faulty body control unit (less common)
What to do
How to read code B1698
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B1698 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B1698 mean?
Mirror driver/passenger switch circuit short to ground. The control unit detected an unintended connection to ground on the mirror selector switch circuit. The exact meaning is set by the manufacturer and I have no reliable information for your brand: the reference definition describes a short to ground.
Can I keep driving with code B1698 active?
With caution: limp mode possible, have it checked soon
Common causes — B1698
Switch wire with worn insulation touching the body Mirror switch with faulty contacts or liquid ingress Corroded door connector Wiring damaged by repeated door opening Faulty body control unit (less common)
How do you fix code B1698?
Check the mirror switch, which may have got wet, and the wiring in the door hinge area. It does not prevent driving, but mirrors must be properly adjustable, so have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B1697 — Mirror driver/passenger switch circuit short to ba...
- Next code: B1699 — Passenger seat occupied switch circuit short to gr...
Related codes
- B1600 — PATS anti-theft: no signal from ignition key transponder
- B1601 — PATS anti-theft: incorrect key code from ignition transponde...
- B1602 — PATS anti-theft: invalid key code format from transponder
- B1603 — Anti-theft indicator lamp circuit failure
- B1604 — Anti-theft indicator lamp circuit open
- B1605 — Anti-theft indicator lamp circuit shorted to battery
- B1606 — Anti-theft indicator lamp circuit shorted to ground
- B1607 — Illuminated entry input circuit failure
- B1608 — Illuminated entry input circuit open
- B1609 — Illuminated entry input shorted to battery
- B1610 — Illuminated entry input shorted to ground
- B1611 — Rear wiper mode select switch circuit failure