B2199 — VICS module fault (traffic information)
| Meaning | The control unit has detected an error in the VICS module, the traffic information system used mainly on vehicles built for the Japanese market. Code B2199 is manufacturer-defined and I can't be certain of its exact meaning on every make. In general it indicates a malfunction of the module, with no effect on driving. |
| Family | Body (B) |
Typical symptoms
Navigation without road-condition updates
Error message on the display
Traffic function cannot be selected
Slow or unstable navigation system
Common causes
Faulty receiving antenna or wiring
Corroded or loose connector
Unstable power supply to the module
Outdated module software
Imported car with a service not compatible with your region
What to do
How to read code B2199
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code B2199 starts with B: it belongs to the body (airbags, comfort, lights) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code B2199 mean?
VICS module fault (traffic information). The control unit has detected an error in the VICS module, the traffic information system used mainly on vehicles built for the Japanese market. Code B2199 is manufacturer-defined and I can't be certain of its exact meaning on every make. In general it indicates a malfunction of the module, with no effect on driving.
Can I keep driving with code B2199 active?
With caution: limp mode possible, have it checked soon
Common causes — B2199
Internal failure of the VICS module Faulty receiving antenna or wiring Corroded or loose connector Unstable power supply to the module Outdated module software Imported car with a service not compatible with your region
How do you fix code B2199?
Check the module's connectors, cables and power supply. If the car is an import, keep in mind the service may simply not work in your area. It is not an urgent fault, but have the code read with a tool suited to the make.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: B2198 — TrafficMaster module fault
- Next code: B2200 — No communication with the TV module
Related codes
- B2100 — Driver door key cylinder switch fault
- B2101 — Head restraint switch circuit fault
- B2102 — Antenna circuit short to ground
- B2103 — Antenna not connected or antenna signal missing
- B2104 — Passenger door key cylinder switch fault
- B2105 — Throttle position input too low (definition to be confirmed)
- B2106 — Throttle position input too high (definition to be confirmed...
- B2107 — Front wiper motor relay circuit shorted to battery positive
- B2108 — Trunk key cylinder switch fault
- B2109 — Heated windshield relay circuit shorted to battery positive
- B2110 — Front wiper motor relay circuit open
- B2111 — Door lock input shorted to ground