C1460 — Vehicle accelerometer power supply: circuit fault
| Meaning | The control unit detected a problem in the circuit that powers the vehicle accelerometer, the sensor that measures body movements. This code is manufacturer-defined and I have no reliable information on exactly which sensors it powers on every brand. Without a correct supply the sensors may give wrong readings or none at all. |
| Family | Chassis (C) |
Typical symptoms
Adaptive damping reduced or fixed
Fault message on the display
Several accelerometer codes at once
Common causes
Corroded or loose connector
Poor ground in the circuit
Sensor drawing abnormal current
Internal fault in the module providing the supply
What to do
How to read code C1460
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code C1460 starts with C: it belongs to the chassis (brakes, steering, suspension) area. It is defined by the manufacturer, so the exact meaning can change from make to make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code C1460 mean?
Vehicle accelerometer power supply: circuit fault. The control unit detected a problem in the circuit that powers the vehicle accelerometer, the sensor that measures body movements. This code is manufacturer-defined and I have no reliable information on exactly which sensors it powers on every brand. Without a correct supply the sensors may give wrong readings or none at all.
Can I keep driving with code C1460 active?
With caution: limp mode possible, have it checked soon
Common causes — C1460
Fuse or supply wiring problem Corroded or loose connector Poor ground in the circuit Sensor drawing abnormal current Internal fault in the module providing the supply
How do you fix code C1460?
Check the fuses, connectors and grounds of the circuit and measure the voltage reaching the sensors. If several accelerometer codes appear together, start here before replacing any sensor.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: C1459 — Adaptive mode switch: circuit fault
- Next code: C1461 — Vehicle accelerometer power supply: short to batte...
Related codes
- C1400 — Traction control valve right front: circuit failure
- C1401 — Traction control valve right front: open circuit
- C1402 — Traction control valve right front: short to ground
- C1403 — Traction control valve right front: short to battery
- C1404 — Traction control valve rear: circuit failure
- C1405 — Rear traction control valve circuit open
- C1406 — Rear traction control valve circuit shorted to ground
- C1407 — Rear traction control valve circuit shorted to battery
- C1410 — Left front traction control valve circuit failure
- C1411 — Left front traction control valve circuit open
- C1412 — Left front traction control valve circuit shorted to ground
- C1413 — Left front traction control valve circuit shorted to battery