MAN fault codes
2.462 codes with meaning, severity and what to do, from 6045 to 8134. Page 12 of 13.
- 6045 — ECAM1 message not on T-CAN
- 6047 — T-CAN fault: VDC1 message could not be received
- 6048 — I-CAN ETC2 no message
- 6050 — DM-1 ZBR2 message could not be sent (I-CAN)
- 6051 — DM-1 message vehicle error memory and
- 6052 — I-CAN error: No chassis number message
- 6053 — T-CAN error: KSM2 message could not be received
- 6054 — Vehicle weight message from EBS could not be sent
- 6055 — ECAS message failure (ASC1_A)
- 6056 — ECAS message failure (RGE21)
- 6057 — I-CAN error: No door check message
- 6058 — Aux_stat_Inst_2 not on I-CAN Switch message
- 6059 — ESP message failure
- 6060 — ECAS message failure (ASC3) height information
- 6061 — Vehicle weight message from ECAS could not be sent
- 6062 — Vehicle weight message from EBS could not be sent
- 609 — Central control unit - B-controller
- 61 — Limit switch CLOSED door 1 (rear)
- 6110 — Status IKN active
- 6111 — Status node 1.1 fault number
- 6112 — Status node 1.2 fault number
- 6113 — Status node 1.3 fault number
- 6114 — Status node 1.4 fault number
- 6115 — Status node 1.5 fault number
- 6116 — Status node 1.6 fault number
- 6117 — Status node 1.7 fault number
- 6118 — Status node 1.8 fault number
- 6121 — Status node 2.1 fault number
- 6122 — Status node 2.2 fault number
- 6123 — Status node 2.3 fault number
- 6124 — Status node 2.4 fault number
- 6125 — Status node 2.5 fault number
- 6126 — Status node 2.6 fault number
- 6127 — Status node 2.7 fault number
- 6128 — Status node 2.8 fault number
- 617 — Parking brake output
- 62 — Limit switch CLOSED door 2 (front)
- 620 — Electrical power supply to steering angle sensors
- 6202 — I-CAN fault: Aux_stat_ZBR_2 message
- 6203 — I-CAN fault: Aux_stat_ZBR_3 message
- 6205 — I-CAN fault: Dash Display message could not be sent
- 6206 — T-CAN fault: ECAM1 message could not be sent
- 6207 — I-CAN fault: ECAM1 message could not be sent
- 6208 — I-CAN fault: DM1 ZBR2 message could not be sent
- 6209 — I-CAN fault: DM1 OBDU message could not be sent
- 6250 — no CAN message buffer
- 6251 — CAN message not evaluated
- 627 — Monitoring of voltage supply on PIN X1/16 - X1/17
- 6280 — ROM test (program code) incorrect
- 6281 — ROM test (EOL parameters) incorrect
- 629 — No text! Specific to control unit
- 63 — Limit switch CLOSED door 2 (rear)
- 6302 — Serial communication
- 6303 — T CAN ground
- 6304 — T-CAN warning level, temporary fault T-CAN
- 6305 — I-CAN warning level, temporary fault I-CAN
- 6320 — Status EBS (T-CAN) fault number
- 6321 — Status engine control (T-CAN) fault no.
- 6322 — Status gearbox (T-CAN) fault no.
- 6323 — Status MTS fault number
- 6324 — Status retarder (T-CAN) fault no.
- 6325 — Status ECAS (T-CAN) fault number
- 6326 — Status door 1 (K3-CAN) fault number
- 6327 — Status door 2 (K3-CAN) fault number
- 6328 — Status door 3 (K3-CAN) fault number
- 6329 — Status door 4 (K3-CAN) fault number
- 637 — Timing Sensor
- 638 — Rack Actuator
- 639 — Sae J1939 Data Link
- 6393 — Status K3-CAN fault no. (new: 01673)
- 6394 — Status FFR (T-CAN) fault number
- 6395 — Status ECAS2 (T-CAN) fault number
- 6396 — Status CBR2 (T-CAN)
- 6397 — Status ECAM (T-CAN)
- 64 — Limit switch CLOSED door 3 (front)
- 6400 — Monitor
- 6401 — Monitor
- 6402 — Reversing camera
- 6403 — Reversing camera
- 645 — External sequential fault: Time overrun or fault condition
- 647 — Fan clutch
- 65 — Limit switch CLOSED door 3 (rear)
- 6500 — Snow chains
- 6501 — Snow chains
- 6502 — Emergency exit window
- 651 — Injection valve of cylinder 1
- 652 — Injection valve of cylinder 2
- 653 — Injection valve of cylinder 3
- 654 — Injection valve of cylinder 4
- 655 — Injection valve of cylinder 5
- 656 — Injection valve of cylinder 6
- 66 — Limit switch CLOSED door 4 (front)
- 6600 — Galley
- 6601 — Coffee machine
- 6602 — Toilet
- 6603 — Winter package
- 67 — Limit switch CLOSED door 4 (rear)
- 68 — Limit switch CLOSED door 5 (front)
- 69 — Limit switch CLOSED door 5 (rear)
- 697 — Accelerator pedal PWM1 signal
- 698 — Accelerator pedal PWM2 signal
- 699 — Accelerator pedal PWM1 and PWM2 signal
- 7 — Brake pressure brake circuit 2
- 70 — No 'parking brake' signal
- 702 — Earth switch output, adjustable parameters
- 703 — Switch terminal 30 output, adjustable parameters
- 704 — Switch 2 terminal 30 output, adjustable parameters
- 705 — Switch 3 terminal 30 output, adjustable parameters
- 706 — Switch 4 terminal 30 output, adjustable parameters
- 707 — Switch 5 terminal 30 output, adjustable parameters
- 708 — Earth switch 2 output, adjustable parameters
- 709 — Earth switch 3 output, adjustable parameters
- 71 — Pressure monitoring door 2
- 711 — Duration of main injection
- 72 — Pressure monitoring door 3
- 723 — Auxiliary engine speed sensor
- 73 — Pressure monitoring door 4
- 731 — Knock sensor 1
- 734 — Solenoid valve circuit 1
- 735 — Solenoid valve circuit 2
- 736 — Solenoid valve circuit 3
- 737 — Solenoid valve circuit 4
- 738 — Solenoid valve pressure regulator
- 739 — Solenoid valve regeneration
- 74 — Lamp, road speed limiting
- 743 — On/off valve
- 744 — Proportional valve
- 746 — Differential lock valve (differential lock switch)
- 748 — Retarder actuated
- 75 — Reference voltage door sensors door 1
- 76 — Reference voltage door sensors door 2
- 764 — Pressure sensor housing pressure
- 767 — Transmission Reverse Direction Switch
- 77 — Reference voltage door sensors door 3
- 770 — Split H
- 771 — Split L
- 773 — DNR switch
- 78 — Reference voltage door sensors door 4
- 780 — Gearbox neutral indicator
- 789 — Wheel sensor wheel 1
- 79 — Reference voltage door sensors door 5
- 790 — Wheel sensor wheel 2
- 791 — Wheel sensor wheel 3
- 792 — Wheel sensor wheel 4
- 793 — Wheel sensor wheel 5
- 794 — Wheel sensor wheel 6
- 8 — Accelerator pedal position
- 80 — Door sensor door 1 front
- 8000 — Oil separator
- 8001 — Oil separator middle of vehicle
- 8002 — Oil separator rear
- 8003 — Reservoir pressure BK1 too low
- 8004 — Reservoir pressure BK2 too low
- 8005 — Reservoir pressure BK4 too low
- 8006 — Reservoir pressure BK2 sensor defective
- 8007 — Reservoir pressure BK1 sensor defective
- 8008 — Res. pres. BK2 sensor def. or. n.c
- 8009 — Res. pres. BK1 sensor def. or. n.c
- 8010 — Pressure below warning level
- 8011 — Initial filling of circuit 1 – faulty
- 8012 — Initial filling of circuit 2 – faulty
- 8013 — Initial filling of circuit 3 – faulty
- 8014 — Initial filling of circuit 4 – faulty
- 8020 — No valid fault definition
- 81 — Door sensor door 1 rear
- 8100 — Control unit defective; ROM checksum incorrect
- 8101 — Control unit defective; RAM fault
- 8102 — Control unit defective; calibration data
- 8103 — CAN message tachograph
- 8104 — CAN message tachograph: Route information
- 8105 — CAN message tachograph: Date / time
- 8106 — CAN message ECAM
- 8107 — CAN message central on-board computer
- 8108 — CAN message EDC: Cooling water temperature
- 8109 — CAN message gearbox control unit
- 8110 — CAN message gearbox control unit: Display
- 8111 — CAN message EDC: Boost pressure
- 8112 — CAN message EDC: Engine speed
- 8113 — CAN message vehicle management computer
- 8114 — Combi-internal: ICOM total failure
- 8115 — Display fault
- 8116 — Stepping motor zero point
- 8117 — Buffer overrun with DM1 fault messages
- 8118 — Combi-internal: Checksum error when reading
- 8119 — Combi-internal: Checksum error when reading
- 8120 — Combi-internal: Temperature outside the
- 8121 — CAN message central on-board computer
- 8122 — CAN message central on-board computer
- 8123 — CAN message central on-board computer
- 8124 — CAN message central on-board computer
- 8125 — CAN message central on-board computer
- 8126 — CAN message central on-board computer
- 8127 — CAN message central on-board computer
- 8128 — CAN message central on-board computer
- 8129 — CAN message central on-board computer
- 8130 — CAN message EDC: Cruise control vehicle speed
- 8131 — Failure of vehicle identification message
- 8132 — Failure of Transmission Fluids exclusive message
- 8133 — Consistency error/plausibility error in configuration
- 8134 — EOL parameter content: Error