Skip to content
Fault code dictionary (DTC)

P000A — Camshaft A position slow response, bank 1

Severity: Serious Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit commanded a timing change on camshaft A on bank 1, usually the intake one, but the camshaft responded too slowly. The variable timing system isn't reaching the requested position in the expected time.
FamilyPowertrain (P)

Typical symptoms

Check engine light on
Unstable idle
Loss of power
Fuel use that seems higher
Rough running when cold

Common causes

Dirty, low or too thick oil
Dirty or faulty timing solenoid
Clogged solenoid screen
Worn camshaft phaser
Insufficient oil pressure

What to do

Check the oil level and condition, and consider changing it with the grade the manufacturer specifies. You can drive for a short time with this fault, but don't ignore it.

How to read code P000A

This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.

The code P000A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (0A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P000A mean?

Camshaft A position slow response, bank 1. The control unit commanded a timing change on camshaft A on bank 1, usually the intake one, but the camshaft responded too slowly. The variable timing system isn't reaching the requested position in the expected time.

Can I keep driving with code P000A active?

With caution: limp mode possible, have it checked soon

Common causes — P000A

Dirty, low or too thick oil Dirty or faulty timing solenoid Clogged solenoid screen Worn camshaft phaser Insufficient oil pressure

How do you fix code P000A?

Check the oil level and condition, and consider changing it with the grade the manufacturer specifies. You can drive for a short time with this fault, but don't ignore it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes