P000C — Camshaft A position slow response, bank 2
| Meaning | The control unit commanded a timing change on camshaft A on bank 2, usually the intake one, but the response was too slow. The variable timing system isn't reaching the requested position in the expected time. |
| Family | Powertrain (P) |
Typical symptoms
Unstable idle
Loss of power
Rough running when cold
Hesitation when accelerating
Common causes
Dirty or faulty timing solenoid
Clogged solenoid screen
Worn camshaft phaser
Low oil pressure
What to do
How to read code P000C
This is a serious fault: driving behaviour may get worse or other components may be damaged if the vehicle is used without checking it.
The code P000C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (0) points to fuel and air metering and auxiliary emission controls, and the last two (0C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P000C mean?
Camshaft A position slow response, bank 2. The control unit commanded a timing change on camshaft A on bank 2, usually the intake one, but the response was too slow. The variable timing system isn't reaching the requested position in the expected time.
Can I keep driving with code P000C active?
With caution: limp mode possible, have it checked soon
Common causes — P000C
Dirty, low or unsuitable oil Dirty or faulty timing solenoid Clogged solenoid screen Worn camshaft phaser Low oil pressure
How do you fix code P000C?
Check the oil level and condition. If there are also codes on bank 1, the cause is probably shared, such as the oil. Have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P000B — Camshaft B position slow response, bank 1
- Next code: P000D — Camshaft B position slow response, bank 2
Related codes
- P0001 — Fuel Volume Regulator Control Circuit Open
- P0002 — Fuel volume regulator performance out of range
- P0003 — Fuel volume regulator control circuit low
- P0004 — Fuel volume regulator control circuit high
- P0005 — Fuel shutoff valve control circuit fault
- P0006 — Fuel shutoff valve control circuit low
- P0007 — Fuel shutoff valve control circuit high
- P0008 — Engine position system performance, bank 1
- P0009 — Engine position system performance, bank 2
- P000A — Camshaft A position slow response, bank 1
- P000B — Camshaft B position slow response, bank 1
- P000D — Camshaft B position slow response, bank 2