P0168 — Engine Fuel Temperature Too High
| Meaning | The engine computer has detected that the temperature of the fuel in the delivery system is higher than normal. This usually happens when the fuel absorbs excessive heat from the engine bay or the return fuel system overworks. |
| Family | Powertrain (P) |
Typical symptoms
Engine might be harder to start when it is already warm
Check Engine light is illuminated on the dashboard
Common causes
Faulty fuel temperature sensor giving an incorrect reading
Restricted fuel return line causing fuel to stay too long near the hot engine
Issues with the vehicle's cooling system raising overall underhood temperatures
What to do
How to read code P0168
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0168 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (1) points to fuel and air metering, and the last two (68) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0168 mean?
Engine Fuel Temperature Too High. The engine computer has detected that the temperature of the fuel in the delivery system is higher than normal. This usually happens when the fuel absorbs excessive heat from the engine bay or the return fuel system overworks.
Can I keep driving with code P0168 active?
With caution: limp mode possible, have it checked soon
Common causes — P0168
Soaked heat from the engine bay affecting fuel lines or the rail Faulty fuel temperature sensor giving an incorrect reading Restricted fuel return line causing fuel to stay too long near the hot engine Issues with the vehicle's cooling system raising overall underhood temperatures
How do you fix code P0168?
Check the fuel temperature sensor and its wiring connector first for any obvious damage or loose pins. It is best to have this checked during your next routine service, but avoid driving in extreme heat if the engine shows performance issues.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0167 — O2 Sensor Heater Circuit Malfunction (Bank 2 Senso...
- Next code: P0169 — Incorrect Fuel Composition
Related codes
- P0100 — Mass or Volume Air flow Circuit Malfunction
- P0101 — Mass air flow sensor: range/performance
- P0102 — Mass air flow sensor: signal too low
- P0103 — Mass or Volume Air flow Circuit High Input
- P0104 — Mass or Volume Air flow Circuit Intermittent
- P0105 — Manifold Absolute Pressure/Barometric Pressure Circuit Malfu...
- P0106 — Manifold Absolute Pressure/Barometric Pressure Circuit Range...
- P0107 — Manifold Absolute Pressure/Barometric Pressure Circuit Low I...
- P0108 — Manifold Absolute Pressure/Barometric Pressure Circuit High...
- P0109 — Manifold Absolute Pressure/Barometric Pressure Circuit Inter...
- P0110 — Intake Air Temperature Circuit Malfunction
- P0111 — Intake Air Temperature Circuit Range/Performance Problem